eCite Digital Repository

Items where School is Electrical and Electronic Engineering

Number of items: 89

Journal Article
Ho, YS and Langman, RA, Accurate speed and slip measurement of induction motors, Journal of Electrical and Electronic Engineering Australia, 16, (1) pp. 73-79. ISSN 0725-2986 (1996) [Refereed Article] 
Sablik, MJ and Langman, RA, Approach to the anhysteretic Surface, Journal of Applied Physics, 79, (8) pp. 6134-6136. ISSN 0021-8979 (1996) [Refereed Article] 
Ha, QP and Alferov, V, On the parameter-sensitivity problem in control system of DC-motor position drives, Elektrichestvo, (1) pp. 47-53. ISSN 0013-5380 (1996) [Refereed Article] 
Ha, QP, Proportional-integral controllers with fuzzy tuning, Electronics Letters, 32, (11) pp. 1043-1044. ISSN 0013-5194 (1996) [Refereed Article] 
Ha, QP, Robust sliding mode controller with fuzzy tuning, Electronics Letters, 32, (17) pp. 1626-1628. ISSN 0013-5194 (1996) [Refereed Article] 
Negnevitsky, M, An Expert System Application for Clearing Overloads, International Journal of Power and Energy Systems, 15, (1) pp. 9-13. ISSN 0226-1472 (1995) [Refereed Article] 
Sablik, MJ and Kwun, H and Burkhardi, GL and Langman, RA, Biaxial stress effects on magnetization perpendicular to the stress plane, IEEE Trans. Magnetics, 31, (6) pp. 3665-3667. ISSN 0018-9464 (1995) [Refereed Article] 
Alfyorov, VG and Ha, QP, DC-Motor Position Drives with Robust Modal Control, Elektrichestvo, (9) pp. 17-22. ISSN 0013-5380 (1995) [Refereed Article] 
Le, TL and Negnevitsky, M and Piekutowski, M, Expert system application for the loading capability assessment of transmission lines, IEEE Trans. on Power Systems, 10, (4) pp. 1805-1812. ISSN 0885-8950 (1995) [Refereed Article] 
Le, TL and Negnevitsky, M and Piekutowski, M, Expert system application for the loading capability assessment of transmission lines, IEEE Power Engineering Review, 15, (11) pp. 56. ISSN 0885-8950 (1995) [Non Refereed Article] 
Le, TL and Negnevitsky, M and Piekutowski, M, Expert system application for voltage control and VAR compensation, Engineering Intelligent Systems for Electrical Engineering and Communications, 3, (2) pp. 79-85. ISSN 0969-1170 (1995) [Refereed Article] 
Law, NF and Nguyen, DT, Improved convergence of projection based blind deconvolution, IEE Electronics Letters, 31, (20) pp. 1732-1733. ISSN 0013-5194 (1995) [Refereed Article] 
Le, TL and Negnevitsky, M, Knowledge system for thermal rating of overhead conductors, Journal of Electrical and Electronics Engineering, Australia, 15, (4) pp. 315-23 . ISSN 0725-2986 (1995) [Refereed Article] 
Law, NF and Nguyen, DT, Multiple frame projection based blind deconvolution, IEE Electronics Letters, 31, (20) pp. 1734-1735. ISSN 0013-5194 (1995) [Refereed Article] 
Liew, AWE and Nguyen, DT, Reconstruction from wavelet transform modulus maxima using nonexpansive projections, IEE Electronics Letters, 31, (13) pp. 1038-1039. ISSN 0013-5194 (1995) [Refereed Article] 
Liew, AWE and Nguyen, DT, Uniqueness issue of wavelet transform modulus maxima representation and a least squares reconstruction algorithm, IEE Electronics Letters, 31, (20) pp. 1735-1736. ISSN 0013-5194 (1995) [Refereed Article] 
Working Model, Technical Drawing
Belle, A and Langman, RA, The Belle-Wrigley Biaxial Stress Rig, University of Tasmania, Launceston (1995) [Technical Drawing] 
Conference Publication
Hogg, TO and Talhami, HE, A Competitive Non-Linear Approach to Object Recognition: The Generalised Synergetic Algorithm, 1996 Australian New Zealand conference on Intelligent Information Systems, Adelaide, Australia, pp. 47-50. (1996) [Refereed Conference Paper] 
Negnevitsky, M and Ha, QP and Chee, LP and Ting, TH, A fuzzy logic controller for an overhead crane, Proceedings of the 1st International Discourse on Fuzzy Logic and the Management of Complexity, Sydney, Australia, pp. 171-175. (1996) [Refereed Conference Paper] 
Ha, QP, A neural network based controler for multmass electro mechanical systems, The Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 31-36. (1996) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, A neural network-based controller for servo drives, Proceedings of the IEEE 22nd International conference on Industrial Electronics, Control and Instrumentation, Taipei, Taiwan, pp. 904-909. (1996) [Refereed Conference Paper] 
Le, TT and Talhami, HE and Nguyen, DT and Martin, NM, An Application of the Wavelet Transform for the Echo Signal from a Rotating Object, 1996 IEEE Region Ten Conference, Perth, Australia, pp. 587-592. (1996) [Refereed Conference Paper] 
Gale, PH and Negnevitsky, M, An expert system based aid for Anode Optimisation, Australian New Zealand Conference on Intelligent Information Systems, Adelaide, Australia, pp. 18-21. (1996) [Refereed Conference Paper] 
Negnevitsky, M and Le, TL, An expert system based aid for clearing overloads on Power systems Plant, IEEE Internaitonal conference on Intelligent Systems Applications to Power Systems, Orlando, Florida, USA, pp. 292-296. (1996) [Refereed Conference Paper] 
Negnevitsky, M and Le, TL, An expert system for teaching voltage control in power systems, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 15. (1996) [Conference Extract] 
Le, TL and Negnevitsky, M, An Intelligent Systems for short time Loading Capability assessment of Transmission Lines, IEEE International Conference on Intelligent Systems Applications to Power Systems, Orlando, Florida, USA, pp. 80-84. (1996) [Refereed Conference Paper] 
Negnevitsky, M, Application of an intelligent tutoring system on electrical engineering education, Proceedings of the 1996 IEEE International Conference on Multimedia Engineering Education, Melbourne, Australia, pp. 491-497. (1996) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M, Application of the network equivalencing and expert systems techniques for voltage control, Proceedings of the International Conference on Modelling, Gold Coast, Australia, pp. 8. (1996) [Refereed Conference Paper] 
Milanovic, JV and Maslennikov, V and Hiskens, IA, Comparison of Two Different Methods for Locating Important Loads in Power System, Australasian Universities Power Engineering Conference, Melbourne, Australia, pp. 113-118. (1996) [Non Refereed Conference Paper] 
Negnevitsky, M, Crisis Management on power systems a knowledge based approach, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 17. (1996) [Conference Extract] 
Le, TT and Talhami, HE and Nguyen, DT, Detection of the Local Maxima in Time-frequency and Time-Scale Representations, 1996 Australian New Zealand Conference on Intelligent Information Systems, Adelaide, Australia, pp. 43-46. (1996) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M, Expert System Application for Voltage and VAR Control in Power Transmission & Distribution Systems, IEEE Transmission and Distribution Conference, Los Angeles, California, USA, pp. 531-536. (1996) [Refereed Conference Paper] 
Palis, F and Buch, A and Ladra, U and Kurrich, R and Ha, QP and Negnevitsky, M, Fuzzy and Neurocontrol of Drive Systems with changing Parameters and Load, The European Power Electronics Symposium on Electric Drive Design and Applications, Nancy, France, pp. 183-185. (1996) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, Fuzzy tuning in motion control, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 93. (1996) [Conference Extract] 
Ha, QP and Negnevitsky, M, Fuzzy tuning in robust modal control, The 1st International Discourse on Fuzzy Logic and the Management of Complexity, Sydney, Australia, pp. 160-164. (1996) [Refereed Conference Paper] 
Milanovic, JV, In Synchronous Generator Steady-State Stability in the Presence of Uncertainty in Local Load Parameters, International Conference on Electrical Machines, Vigo, Spain, pp. 336-341. (1996) [Non Refereed Conference Paper] 
Negnevitsky, M, Knowledge based systems application to power systems: some experience, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 25-30. (1996) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, Neural Network Application for the Position Drive of a swinging load, The International Conference on Modelling simulation and Optimisation, Gold Coast, Australia, pp. 7. (1996) [Refereed Conference Paper] 
Innes, AG and Ho, YS, Numerical modelling of an induction motor with a broken Rotor Bar, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 61-67. (1996) [Refereed Conference Paper] 
Ho, YS and Langman, RA, On line condition monitoring of induction motors using voltage and current measurement, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 429-435. (1996) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M and Man, Z, Sliding mode Control with fuzzy tuning, IEEE 4th Australian and New Zealand Conference on Intelligent Information Systems, Adelaide, Australia, pp. 216-219. (1996) [Refereed Conference Paper] 
Milanovic, JV and Hiskens, IA, Statistical Analysis of Power System Damping Variation due to load Model Uncertainty, Modellina and Siumulation of Electric Machines, Converters & Systems, St Hazaire, France, pp. 347-352. (1996) [Non Refereed Conference Paper] 
Dobrijevic, DM and Milanovic, JV, Torsional Oscillations and Stability of Turbogenerator, XXXII International Symposium on Electrical Machines, Crakow, Poland, pp. 138-141. (1996) [Non Refereed Conference Paper] 
Negnevitsky, M and Le, TL, Tutoring expert system for teaching valtage control in power systems, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 489-493. (1996) [Refereed Conference Paper] 
Talhami, HE, Visualizing Ultrasonic Vector Velocity using the Motion Without Movement Algorithm, IEEE Region Ten Conference, Perth, Australia, pp. 870-973. (1996) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, A Digital Predictive Observer for Incipient Fault Detection, IEE 3rd International Conference on Advances in Power System Control, Operation and Management, Hong Kong, pp. 183-188. (1995) [Refereed Conference Paper] 
Ha, QP, A digital predictive observer with fuzzy tuning for multi-mass electromechanical systems, Australian Universities Power Engineering Conference, Perth, pp. 428-433. (1995) [Refereed Conference Paper] 
Ha, QP, A dynamic feedforward controller with fuzzy tuning for electromechanical systems, Australian Universities Power Engineering Conference, Perth, pp. 422-427. (1995) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, A Robust Modal Controller with Fuzzy Tuning for Multi-Mass Electromechanical Systems, 3rd Australian and New Zealand Conference on Intelligent Information Systems, Perth, pp. 214-219. (1995) [Refereed Conference Paper] 
McCulloch, JW and The, G and Wherrett, RB, A robust non-parametric adaptive control method, Control 95, Melbourne, pp. 107-110. (1995) [Refereed Conference Paper] 
Law, NF and Nguyen, DT, Accelerated multi-frame projection based blind deconvolution, DICTA-95, Brisbane, pp. 174-179. (1995) [Non Refereed Conference Paper] 
The, G and Stramigioli, S and Ham, A and Honderd, G, An adaptive admittance or force control for robotic manipulators, Control 95, Melbourne, pp. 417-421. (1995) [Refereed Conference Paper] 
Negnevitsky, M, An Aid for Clearing Overloads on the Power System Plant, IEE 3rd International Conference on Advances in Power System, Control, Operation and Management, Hong Kong, pp. 300-305. (1995) [Refereed Conference Paper] 
Wilson, LS and Brown, MS and Talhami, HE and Gill, RW and Sun, C and Doust, B, An expert assistant for chest X-rays using anatomical models, Computer-Assisted Radiology, Berlin, pp. 336-341. (1995) [Non Refereed Conference Paper] 
Negnevitsky, M, An Expert System Based Teaching Tool for Electrical Engineering Subjects, PRCEEE, Marysville, Australia, pp. 170-173. (1995) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M, An Intelligent Tutoring System for the Loading Capability Assessment of Transmission Lines, Pacific Region Conference on Electrical Engineering Education, Marysville, Australia, pp. 162-165. (1995) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M, Application of an Intelligent System for Short-Time Thermal Rating of Transmission Lines, International Power Engineering Conference, Singapore, pp. 648-653. (1995) [Refereed Conference Paper] 
Le, TL, Application of the steady state network equivalents for voltage and VAR control in large power systems, Australian Universities Power Engineering Conference, Perth, pp. 404-409. (1995) [Refereed Conference Paper] 
Sablik, MJ and Langman, RA, Approach to the anhysteretic surface, 40th Annual Conference on Magnetism and Magnetic Materials, Philadelphia, USA, pp. 32-34. (1995) [Refereed Conference Paper] 
Negnevitsky, M and Le, TL, Artificial Neural Network Application for Current Rating of Overhead Line, IEEE International Conference on Neural Networks, Perth, pp. 418-422. (1995) [Refereed Conference Paper] 
Karri, V and Talhami, HE, ARTIFICIAL NEURAL NETWORKS FOR FORCE AND POWER PREDICTIONS IN OBLIQUE CUTTING, 1995 IEEE International Conference on Neural Networks, Perth, Australia, pp. 1-10. (1995) [Refereed Conference Paper] 
Karri, V and Talhami, HE, Artificial Neural Networks for Force and Power Predictions in Oblique Cutting, IEEE International Conference on Neural Networks, Perth, pp. 470-475. (1995) [Refereed Conference Paper] 
Belle, A and Langman, RA, Determining absolute stresses by a non-destructive magnetic technique, 14th Australasian Conference on the Mechanics of Structures and Materials, Hobart, pp. 193-199. (1995) [Refereed Conference Paper] 
Belle, A and Langman, RA, Determining Absolute Stresses by a Non-Destructive Magnetic Technique, 14th Australasian Conference on the Mechanics of Structures and Materials, Hobart, pp. 193-199. (1995) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M and Piekutowski, M, Expert system application for the loading capability assessment of transmission lines, IEEE/PES Winter Meeting, New York, pp. 1-7. (1995) [Refereed Conference Paper] 
Ha, QP and Palis, F, Fuzzy logic application in a robust modal control for position drives, 30th Universities Power Engineering Conference, London, UK, pp. 85-88. (1995) [Non Refereed Conference Paper] 
Arneaud, JM and Langman, RA, Induction motor starting current, Electrical Energy EEcon 95, Adelaide, pp. 203-208. (1995) [Refereed Conference Paper] 
Liew, AWE and Nguyen, DT, Least Square Eigenspace Reconstruction from Wavelet Transform Modulus Maxima, DICTA-95, Brisbane, pp. 366-371. (1995) [Refereed Conference Paper] 
Wilson, LS and Brown, MS and Talhami, HE and Gill, RW and Sun, C and Doust, B, Medical Image Understanding using anatomical models: application to chest x-rays, Information Processing in Medical Imaging 1995, Berder, France, pp. 239-250. (1995) [Non Refereed Conference Paper] 
Brown, MS and Gill, RW and Talhami, HE and Wilson, LS and Doust, BD, Model-based assessment of lung structures: inferencing and control system, SPIE Medical Imaging 1995, San Diego, USA, pp. 167-178. (1995) [Non Refereed Conference Paper] 
Arneaud, JM, Modelling of Leakage Reactance Saturation in Induction Motor Simulation Studies, AUPEC, Perth, Australia, pp. 410-415. (1995) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, New Trends in Control Theory and Their Reflection in Electrical Engineering Education, PRCEEE, Marysville, Australia, pp. 109-112. (1995) [Refereed Conference Paper] 
Ho, YS and Langman, RA, On-line estimation of induction motor speed using voltage and current measurement, Australian Universities Power Engineering Conference, Perth, pp. 357-363. (1995) [Refereed Conference Paper] 
Le, TL and Negnevitsky, M and Piekutowski, M, Reactive Power Compensation Planning to Prevent Voltage Collapse, Australian Universities Power Engineering Conference, Perth, pp. 120-125. (1995) [Refereed Conference Paper] 
Ha, QP and Negnevitsky, M, Root Locus Application for Damping Capability Estimation of Multi-Mass Electromechanical Systems, IEEE 21st International Conference on Industrial Electronics, Control and Instrumentation, Orlando, USA, pp. 633-638. (1995) [Refereed Conference Paper] 
Ha, QP, Root Locus Method Application for Damping Capability Estimation of Multi-Mass Electromechanical Systems, Control 95, Melbourne, pp. 255-259. (1995) [Refereed Conference Paper] 
Ho, YS and Langman, RA, Rotor speed estimation of induction machines by monitoring the stator voltages and currents, Electrical Energy Conference, Adelaide, pp. 209-215. (1995) [Refereed Conference Paper] 
Liew, AWE and Nguyen, DT, Signal Reconstruction from the Wavelet Transform Modulus Maxima, Third Australian and New Zealand Conference on Intelligent Information Systems, Perth, pp. 36-40. (1995) [Refereed Conference Paper] 
Arneaud, JM and Wherrett, RB, The Development of CD-Rom-Based Tutorial Material for Electro-Mechanical Energy Conversion, AUPEC, Perth, Australia, pp. 466-471. (1995) [Refereed Conference Paper] 
Hogg, T and Rees, D and Talhami, HE, Three-dimensional pose from two-dimensional images: a novel approach using synergetic networks, IEEE International Conference on Neural Networks, Perth, pp. 1140-1144. (1995) [Refereed Conference Paper] 
Faulkner, E and Talhami, HE, Using 'Biological' Genetic Algorithms to Solve the Travelling Salesman Proglem with Applications in Medical Image Processing, IEEE International Conference on Evolutionary Computing, Perth Australia, pp. 707-710. (1995) [Non Refereed Conference Paper] 
Faulkner, G and Talhami, HE, Using Biological Genetic Algorithms to Solve the Travelling Salesman Problem with Applications in Medical Image Processing, IEEE International Conference on Evolutionary Computations, Perth, pp. 707-710. (1995) [Non Refereed Conference Paper] 
Le, TL and Negnevitsky, M and Piekutowski, M, Voltage Stability and VAR Compensation Planning in the HEC System, IEE 3rd International Conference on Advances in Power System Control, Operations and Management, Hong Kong, pp. 224-229. (1995) [Refereed Conference Paper] 
Contract Report, Consultant's Report
Negnevitsky, M, Artificial Intelligence Application on Power systems, ESAA, AESIRB/95059 (1996) [Contract Report] 
Thesis
Arneaud, JM, An Algorithm for the selection of a method for the modelling of direct-on-line starting of cage induction inters for finite supplies (1996) [PhD] 
Le, TL, Artificial Intelligence Application to security control on Power System (1996) [PhD] 
Stoksik, MA, Applications of Fractals to Image Processing (1995) [PhD] 
Dirita, V, Hardware and Software development of the Anglescan Tracking System (1995) [Masters Research] 
Gunawan, D, Psychovisual video coding using wavelet transform (1995) [PhD] 

This list was generated on Thu May 13 21:59:31 2021.