| Conference Publication |
|---|
| Rostami, A and Bagheri, M and Naderi, SB and Negnevitsky, M and Jalilian, A and Blaabjerg, F, A novel islanding detection scheme for synchronous distributed generation using rate of change of exciter voltage over reactive power at DG-side, Proceedings from the 27th Australasian Conference on Information Systems, 19-22 November 2017, Melbourne, Australia, pp. 1-5. ISBN 9781538626481 (2018) [Refereed Conference Paper] | |
| Rostami, A and Jalilian, A and Naderi, SB and Negnevitsky, M and Davari, P and Blaabjerg, F, A novel passive islanding detection scheme for distributed generations based on rate of change of positive sequence component of voltage and current, Proceedings from the Australian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, Australia, pp. 1-5. ISBN 9781538626481 (2018) [Refereed Conference Paper] | |
| Brinkmann, B and Bicevskis, K and Scott, R and Negnevitsky, M, Evaluation of single- and three-phase state estimation in distribution networks, Proceedings from the Australian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, Australia, pp. 1-5. ISBN 9781538626481 (2018) [Refereed Conference Paper] | |
| Naderi, SB and Jafari, M and Zandnia, A and Jalilian, A and Davari, P and Negnevitsky, M and Blaabjerg, F, Investigation on capacitor switching transient limiter with a three phase variable resistance, Proceedings from the Australian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, Australia, pp. 1-6. ISBN 9781538626481 (2018) [Refereed Conference Paper] |  |
| Tavakoli, A and Najafi, A and Haque, ME and Hossain, MJ and Negnevitsky, M, Voltage regulation for off-peak and peak conditions in distribution networks with the high penetration of PV units, Proceedings from the Australian Universities Power Engineering Conference, 19-22 November 2017, Melbourne, Australia, pp. 1-6. ISBN 9781538626481 (2018) [Refereed Conference Paper] | |
| Naderi, SB and Negnevitsky, M and Muttaqi, KM, A modified DC chopper for limiting the fault current and controlling the DC link voltage to enhance ride-through capability of doubly-fed induction generator based wind turbine, Proceeding from the IEEE Industry Applications Society Annual Meeting, 1-5 October 2017, Ohio, United States, pp. 449-456. ISBN 9781509048953 (2017) [Refereed Conference Paper] | |
| Brinkmann, B and Scott, R and Bicevskis, K and Negnevitsky, M, A practical approach to meter placement in distribution networks, Proceedings from the 2017 IEEE Manchester PowerTech, 18-22 June 2017, Manchester, United Kingdom, pp. 192-197. ISBN 9781509042388 (2017) [Refereed Conference Paper] | |
| Negnevitsky, M and Lim, MJ and Hartnett, J, Analysis of e-mail communication activities for detecting patterns of pathological behaviour, Proceedings of the 20th Conference of Fruct Association, 3-7 April 2017, St. Petersburg, Russia, pp. 322-327. ISSN 2305-7254 (2017) [Refereed Conference Paper] | |
| Tomin, N and Zhukov, A and Kurbatsky, V and Sidorov, D and Negnevitsky, M, Development of automatic intelligent system for on-line voltage security control of power systems, Proceedings from the 2017 IEEE Manchester PowerTech, 18-22 June 2017, Manchester, United Kingdom, pp. 674-781. ISBN 9781509042388 (2017) [Refereed Conference Paper] | |
| Negnevitsky, M, Identification of failing banks using clustering with self-organising neural networks, Procedia Computer Science, 12-14 June 2017, Zurich, Switzerland, pp. 1327-1333. ISSN 1877-0509 (2017) [Conference Extract] | |
| Negnevitsky, M, Preventing large-scale emergencies in modern power systems: AI approach, Proceedings of the 9th International Scientific Symposium on Electrical Power Engineering (ELEKTRENERGETIKA 2017), 12-14 July 2017, Stara Lesna, Slovakia, pp. 30-35. ISBN 9781510846531 (2017) [Conference Extract] | |
| Negnevitsky, M and Nguyen, H and Piekutowski, M, Risk assessment of frequency response and reserve requirement for a power system with high wind power penetration, Proceeding of the 9th International Scientific Symposium on Electrical Power Engineering ELEKTRENERGETIKA 2017, 12-14 July 2017, Stara Lesna, Slovakia, pp. 494-497. ISBN 9781510846531 (2017) [Refereed Conference Paper] | |
| Wang, Jungyong and Akinturk, A and Bose, N and Jones, SJ, An Overview of Model Tests and Numerical Predictions for Propeller-Ice Interaction, Proceedings of 8th CMHSC, 16 - 17 October 2007, St Johns, pp. CD ROM. (2007) [Non Refereed Conference Paper] | |
| Bose, N, Chair Session 2 - Innovative Applications - The Australian Hydrographic Society and Society for Underwater Technology 3rd Joint Technical Seminar and Exhibition, The Australian Hydrographic Society and Society for Underwater Technology 3rd Joint Technical Seminar and Exhibition, 1 November 2007, Perth (2007) [Chair International Conference] | |
| Islam, M and Veitch, B and Akinturk, A and Bose, N and Liu, P, Experiments with Podded Propulsors in Static Azimuthing Conditions, Proceedings of 8th CMHSC, 16 -17 October 2007, St Johns, pp. CD ROM. (2007) [Non Refereed Conference Paper] | |
| Bose, N and Adams, S and Lewis, R and Anderson, J, Explorer class AUV operated by Memorial University, AUVs Future Technologies and Emerging Markets, CD, 1 November 2007, Perth (2007) [Conference Extract] | |
| Molyneux, D and Xu, Jie and Bose, N, Flow Vectors Around an Escort Tug at a Large Yaw Angle, Proceeding of 8th CMHSC, 16 -17 October 2007, St Johns, pp. CD ROM. (2007) [Non Refereed Conference Paper] | |
| Murrin, D and Ordonez, M and Stone, G and Bose, N and Qiu, W, High Mode Vortex Induced Vibration(VIV) Experiments on a Large-Scale Riser, Proceeding of the OCEANS 2007 MTS/IEEE, 1 - 4 October 2007, Vancouver , pp. CD ROM. ISBN 0-933957-35-1 (2007) [Non Refereed Conference Paper] | |
| Issac, M and Adams, S and He, M and Bose, N and Williams, C and Bachmayer, R and Crees, T, Manoeuvring Experiments Using the MUN Explorer AUV, Proceedings of International Symposium on Underwater Technology 2007, 17t- 20 September 2007, University of Tokyo, pp. CD rom. (2007) [Non Refereed Conference Paper] | |
| Murrin, D and Militzer, J and Bose, N and Campregher, R, Numerical Investigation of the Influence of Span-wise Force Variation in Circular Cylinders Undergoing Vortex Induced Vibrations at High Reynolds Number, Proceedings of OCEANS 2007 MTS/IEEE, 1 - 4 October 2007, Vancouver, pp. CD ROM . ISBN 0-933957-35-1 (2007) [Non Refereed Conference Paper] | |
| Azarsina, F and Williams, C and Bass, D and Bose, N, Re-analysis of the 'Akron' Airship Pressure Data to Design Pressure Measurement Experiments on an Underwater Vehicle, Proceedings of the OCEANS 2007 MTS/IEEE, 1 - 4 October 2007, Vacouver, pp. CD ROM. ISBN 0-933957-35-1 (2007) [Non Refereed Conference Paper] | |
| Karri, V, Drilling Performance Prediction Using General Regression Neural Networks, Proceedings of the 13th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems: ntelligent Problem Solving - Methodologies and Approaches, June 19-22,2000, New Orleans, Louisiana, USA, pp. 67-72. ISBN 3 540-67689-9 (2000) [Refereed Conference Paper] | |
| Karri, V, General Regression Neural Networks to Estimate Surface Finish and Power in Cylindrical Turning Operations, Proceedings of the International Conference on Artificial Intelligence IC-AI'2000, June 26-29,2000, Las Vegas, USA, pp. 1532-1536. ISBN 1-892512-58-0 (2000) [Refereed Conference Paper] | |
| Karri, V, Mechanics of Cutting and Neural Network Approaches to Turning Performance, Proceedings of the International Conference on Artificial Intelligence IC-AI'2000, June 26-29,2000, Las Vegas, USA, pp. 1527-1531. ISBN 1-892512-58-0 (2000) [Refereed Conference Paper] | |
| Frost, F and Karri, V, Determining the Influence of Input Parameters on BP Neural Network Output Error Using Sensitivity Analysis, Third International Conference on Computational Intelligence and Multimedia Applications (ICCIMA'99), 23-26 September, 1999, New Deli, India, pp. 45-49. ISBN 0-7695-0300-4 (1999) [Refereed Conference Paper] | |
| Karri, V, Intelligent Sensor Fusion Approach to Cutting Tool Wear Estimation, International Conference on Soft Computing and Measurements, 22-26 June, 1998, St. Petersburg, Russia, pp. 76-83. (1998) [Non Refereed Conference Paper] | |
| Karri, V, Intelligent System for Tool Selection in Wood Working Routers, Conference Program for the 2nd International Conference on Engineering Design and Automation (EDA), 9-12 December, 1998, Hawaii EJ (1998) [Refereed Conference Paper] | |
| Karri, V, Mechanics of Cutting and Neural Network Approaches to Turning Performance Prediction - A Comparison, Proceedings of the Fifth international Conference on Control, Automation, Robotics and Vision, 8-11 December, 1998, Singapore, pp. 1622-1626. ISBN 981-04-0318-6 (1998) [Refereed Conference Paper] | |
| Karri, V, Progressive Cutting Tool Wear Monitoring using Neural Networks, Conference Program for the 2nd International Conference on Engineering Design and Automation (EDA), 9-12 December 1998, Hawaii EJ (1998) [Refereed Conference Paper] | |
| Negnevitsky, M and Ha, QP and Chee, LP and Ting, TH, A fuzzy logic controller for an overhead crane, Proceedings of the 1st International Discourse on Fuzzy Logic and the Management of Complexity, Sydney, Australia, pp. 171-175. (1996) [Refereed Conference Paper] | |
| Ha, QP, A neural network based controler for multmass electro mechanical systems, The Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 31-36. (1996) [Refereed Conference Paper] | |
| Karri, V, A Neural Network Controller in Automated Wood Machining, Fourth IASTEDInternational Conference: Robotics and Manufacturing, Hawaii, USA, pp. 243-256. (1996) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, A neural network-based controller for servo drives, Proceedings of the IEEE 22nd International conference on Industrial Electronics, Control and Instrumentation, Taipei, Taiwan, pp. 904-909. (1996) [Refereed Conference Paper] | |
| Gale, PH and Negnevitsky, M, An expert system based aid for Anode Optimisation, Australian New Zealand Conference on Intelligent Information Systems, Adelaide, Australia, pp. 18-21. (1996) [Refereed Conference Paper] | |
| Negnevitsky, M and Le, TL, An expert system based aid for clearing overloads on Power systems Plant, IEEE Internaitonal conference on Intelligent Systems Applications to Power Systems, Orlando, Florida, USA, pp. 292-296. (1996) [Refereed Conference Paper] | |
| Negnevitsky, M and Le, TL, An expert system for teaching voltage control in power systems, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 15. (1996) [Conference Extract] | |
| Le, TL and Negnevitsky, M, An Intelligent Systems for short time Loading Capability assessment of Transmission Lines, IEEE International Conference on Intelligent Systems Applications to Power Systems, Orlando, Florida, USA, pp. 80-84. (1996) [Refereed Conference Paper] | |
| Negnevitsky, M, Application of an intelligent tutoring system on electrical engineering education, Proceedings of the 1996 IEEE International Conference on Multimedia Engineering Education, Melbourne, Australia, pp. 491-497. (1996) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M, Application of the network equivalencing and expert systems techniques for voltage control, Proceedings of the International Conference on Modelling, Gold Coast, Australia, pp. 8. (1996) [Refereed Conference Paper] | |
| Milanovic, JV and Maslennikov, V and Hiskens, IA, Comparison of Two Different Methods for Locating Important Loads in Power System, Australasian Universities Power Engineering Conference, Melbourne, Australia, pp. 113-118. (1996) [Non Refereed Conference Paper] | |
| Negnevitsky, M, Crisis Management on power systems a knowledge based approach, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 17. (1996) [Conference Extract] | |
| Le, TL and Negnevitsky, M, Expert System Application for Voltage and VAR Control in Power Transmission & Distribution Systems, IEEE Transmission and Distribution Conference, Los Angeles, California, USA, pp. 531-536. (1996) [Refereed Conference Paper] | |
| Palis, F and Buch, A and Ladra, U and Kurrich, R and Ha, QP and Negnevitsky, M, Fuzzy and Neurocontrol of Drive Systems with changing Parameters and Load, The European Power Electronics Symposium on Electric Drive Design and Applications, Nancy, France, pp. 183-185. (1996) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, Fuzzy tuning in motion control, 11th International Conference on the Applications of Artificial Intelligence in Engineering, Florida, pp. 93. (1996) [Conference Extract] | |
| Ha, QP and Negnevitsky, M, Fuzzy tuning in robust modal control, The 1st International Discourse on Fuzzy Logic and the Management of Complexity, Sydney, Australia, pp. 160-164. (1996) [Refereed Conference Paper] | |
| Milanovic, JV, In Synchronous Generator Steady-State Stability in the Presence of Uncertainty in Local Load Parameters, International Conference on Electrical Machines, Vigo, Spain, pp. 336-341. (1996) [Non Refereed Conference Paper] | |
| Negnevitsky, M, Knowledge based systems application to power systems: some experience, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 25-30. (1996) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, Neural Network Application for the Position Drive of a swinging load, The International Conference on Modelling simulation and Optimisation, Gold Coast, Australia, pp. 7. (1996) [Refereed Conference Paper] | |
| Madsen, O and Karri, V, Neural networks to estimate welding velocity for control of root-bead welding, Advanced Manufacturing Processes, Systems and Technologies, Bradford, UK, pp. 183-192. (1996) [Refereed Conference Paper] | |
| Innes, AG and Ho, YS, Numerical modelling of an induction motor with a broken Rotor Bar, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 61-67. (1996) [Refereed Conference Paper] | |
| Ho, YS and Langman, R, On line condition monitoring of induction motors using voltage and current measurement, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 429-435. (1996) [Refereed Conference Paper] | |
| Sprent, T and Hudson, AJ, Paper mill alignment surveys, 8th FIG International Symposium on Deformation Measurements, Hong Kong Polytechnic University, Hong Kong, pp. 91-96. (1996) [Non Refereed Conference Paper] | |
| Karri, V, Performance Estimation In Turning Process Using Neural Networks, Fourth IASTED International Conference: Robotics and Manufacturing, Hawaii, USA, pp. 247-250. (1996) [Refereed Conference Paper] | |
| Karri, V, Performance estimation in wood machining using artificial neural networks, Advanced Manufacturing Processes, Systems and Technologies (AMPST 96), Bradford, UK, pp. 271-280. (1996) [Refereed Conference Paper] | |
| Karri, V, Performance prediction models in oblique cutting using conventional and neural network approaches - a comparison, Advanced Manufacturing Processes, Systems, and Technologies (AMPST 96), Bradford, UK, pp. 281-290. (1996) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M and Man, Z, Sliding mode Control with fuzzy tuning, IEEE 4th Australian and New Zealand Conference on Intelligent Information Systems, Adelaide, Australia, pp. 216-219. (1996) [Refereed Conference Paper] | |
| Milanovic, JV and Hiskens, IA, Statistical Analysis of Power System Damping Variation due to load Model Uncertainty, Modellina and Siumulation of Electric Machines, Converters & Systems, St Hazaire, France, pp. 347-352. (1996) [Non Refereed Conference Paper] | |
| Dobrijevic, DM and Milanovic, JV, Torsional Oscillations and Stability of Turbogenerator, XXXII International Symposium on Electrical Machines, Crakow, Poland, pp. 138-141. (1996) [Non Refereed Conference Paper] | |
| Negnevitsky, M and Le, TL, Tutoring expert system for teaching valtage control in power systems, Australian Universities Power Engineering Conference, Melbourne, Australia, pp. 489-493. (1996) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, A Digital Predictive Observer for Incipient Fault Detection, IEE 3rd International Conference on Advances in Power System Control, Operation and Management, Hong Kong, pp. 183-188. (1995) [Refereed Conference Paper] | |
| Ha, QP, A digital predictive observer with fuzzy tuning for multi-mass electromechanical systems, Australian Universities Power Engineering Conference, Perth, pp. 428-433. (1995) [Refereed Conference Paper] | |
| Ha, QP, A dynamic feedforward controller with fuzzy tuning for electromechanical systems, Australian Universities Power Engineering Conference, Perth, pp. 422-427. (1995) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, A Robust Modal Controller with Fuzzy Tuning for Multi-Mass Electromechanical Systems, 3rd Australian and New Zealand Conference on Intelligent Information Systems, Perth, pp. 214-219. (1995) [Refereed Conference Paper] | |
| Negnevitsky, M, An Aid for Clearing Overloads on the Power System Plant, IEE 3rd International Conference on Advances in Power System, Control, Operation and Management, Hong Kong, pp. 300-305. (1995) [Refereed Conference Paper] | |
| Negnevitsky, M, An Expert System Based Teaching Tool for Electrical Engineering Subjects, PRCEEE, Marysville, Australia, pp. 170-173. (1995) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M, An Intelligent Tutoring System for the Loading Capability Assessment of Transmission Lines, Pacific Region Conference on Electrical Engineering Education, Marysville, Australia, pp. 162-165. (1995) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M, Application of an Intelligent System for Short-Time Thermal Rating of Transmission Lines, International Power Engineering Conference, Singapore, pp. 648-653. (1995) [Refereed Conference Paper] | |
| Le, TL, Application of the steady state network equivalents for voltage and VAR control in large power systems, Australian Universities Power Engineering Conference, Perth, pp. 404-409. (1995) [Refereed Conference Paper] | |
| Sablik, MJ and Langman, R, Approach to the anhysteretic surface, 40th Annual Conference on Magnetism and Magnetic Materials, Philadelphia, USA, pp. 32-34. (1995) [Refereed Conference Paper] | |
| Negnevitsky, M and Le, TL, Artificial Neural Network Application for Current Rating of Overhead Line, IEEE International Conference on Neural Networks, Perth, pp. 418-422. (1995) [Refereed Conference Paper] | |
| Karri, V and Talhami, HE, ARTIFICIAL NEURAL NETWORKS FOR FORCE AND POWER PREDICTIONS IN OBLIQUE CUTTING, 1995 IEEE International Conference on Neural Networks, Perth, Australia, pp. 1-10. (1995) [Refereed Conference Paper] | |
| Karri, V, COMPUTER-AIDED PREDICTIVE CUTTING MODEL FOR SIMULATED KEYWAY BROACHING OPERATION, Third IASTED International Conference: Robotics and Manufacturing, Cancun, Mexico, pp. 410-413. (1995) [Refereed Conference Paper] | |
| Belle, A and Langman, R, Determining absolute stresses by a non-destructive magnetic technique, 14th Australasian Conference on the Mechanics of Structures and Materials, Hobart, pp. 193-199. (1995) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M and Piekutowski, M, Expert system application for the loading capability assessment of transmission lines, IEEE/PES Winter Meeting, New York, pp. 1-7. (1995) [Refereed Conference Paper] | |
| Karri, V and Adams, A, FORCE PREDICTIONS IN SINGLE EDGED CUTTING OPERATIONS USING ARTIFICIAL NEURAL NETWORKS, Third IASTED International Conference: Robotics and Manufacturing, Cancun, Mexico, pp. 316-320. (1995) [Refereed Conference Paper] | |
| Ha, QP and Palis, F, Fuzzy logic application in a robust modal control for position drives, 30th Universities Power Engineering Conference, London, UK, pp. 85-88. (1995) [Non Refereed Conference Paper] | |
| Arneaud, JM and Langman, R, Induction motor starting current, Electrical Energy EEcon 95, Adelaide, pp. 203-208. (1995) [Refereed Conference Paper] | |
| Karri, V and Mundi, NS, Machining of filled polymer matrix composites, 7th International Conference on Mechanical Behaviour of Materials, The Hague, The Netherlands, pp. 249-250. (1995) [Refereed Conference Paper] | |
| Arneaud, JM, Modelling of Leakage Reactance Saturation in Induction Motor Simulation Studies, AUPEC, Perth, Australia, pp. 410-415. (1995) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, New Trends in Control Theory and Their Reflection in Electrical Engineering Education, PRCEEE, Marysville, Australia, pp. 109-112. (1995) [Refereed Conference Paper] | |
| Karri, V, Oblique Cutting Characteristics of Huon Pine, The Fourteenth Australasian Conference on the Mechanics of Structures and Materials, Hobart, Australia, pp. 669-674. (1995) [Refereed Conference Paper] | |
| Ho, YS and Langman, R, On-line estimation of induction motor speed using voltage and current measurement, Australian Universities Power Engineering Conference, Perth, pp. 357-363. (1995) [Refereed Conference Paper] | |
| Karri, V, Orthogonal Cutting Characteristics of Huon Pine - An Experimental Investigation, The Fourteenth Australasian Conference on the Mechanics of Structures and Materials, Hobart, Australia, pp. 664-668. (1995) [Refereed Conference Paper] | |
| Karri, V, PRACTICAL APPLICATIONS OF NEURAL NETS FOR MANUFACTURING PROCESSES, The 4th Annual Engineering Management Educator's Conference, Auckland, New Zealand, pp. 108-113. (1995) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M and Piekutowski, M, Reactive Power Compensation Planning to Prevent Voltage Collapse, Australian Universities Power Engineering Conference, Perth, pp. 120-125. (1995) [Refereed Conference Paper] | |
| Ha, QP and Negnevitsky, M, Root Locus Application for Damping Capability Estimation of Multi-Mass Electromechanical Systems, IEEE 21st International Conference on Industrial Electronics, Control and Instrumentation, Orlando, USA, pp. 633-638. (1995) [Refereed Conference Paper] | |
| Ha, QP, Root Locus Method Application for Damping Capability Estimation of Multi-Mass Electromechanical Systems, Control 95, Melbourne, pp. 255-259. (1995) [Refereed Conference Paper] | |
| Ho, YS and Langman, R, Rotor speed estimation of induction machines by monitoring the stator voltages and currents, Electrical Energy Conference, Adelaide, pp. 209-215. (1995) [Refereed Conference Paper] | |
| Arneaud, JM and Wherrett, RB, The Development of CD-Rom-Based Tutorial Material for Electro-Mechanical Energy Conversion, AUPEC, Perth, Australia, pp. 466-471. (1995) [Refereed Conference Paper] | |
| Le, TL and Negnevitsky, M and Piekutowski, M, Voltage Stability and VAR Compensation Planning in the HEC System, IEE 3rd International Conference on Advances in Power System Control, Operations and Management, Hong Kong, pp. 224-229. (1995) [Refereed Conference Paper] | |
