eCite Digital Repository

Items where Subject is Field of Research, Agricultural and Veterinary Sciences, Forestry Sciences, Wood Processing

Journal Article
Blackburn, D and Vega, M and Yong, R and Britton, D and Nolan, G, Factors influencing the production of structural plywood in Tasmania, Australia from Eucalyptus nitens rotary peeled veneer, Southern Forests pp. 1-10. ISSN 2070-2620 (2018) [Refereed Article] 
Hamilton, MG and Blackburn, DP and McGavin, RL and Bailleres, H and Vega, M and Potts, BM, Factors affecting log traits and green rotary-peeled veneer recovery from temperate eucalypt plantations, Annals of Forest Science, 72, (3) pp. 357-365. ISSN 1286-4560 (2015) [Refereed Article] 
McGavin, RL and Bailleres, H and Lane, F and Blackburn, D and Vega, M and Ozarska, B, Veneer recovery analysis of plantation eucalypt species using spindleless lathe technology, BioResources, 9, (1) pp. 613-627. ISSN 1930-2126 (2014) [Refereed Article]
Washusen, R and Harwood, C and Morrow, A and Northway, R and Valencia, J and Volker, P and Wood, M and Farrell, RR, Pruned Plantation-Grown Eucalyptus nitens: Effect of Thinning and Conventional Processing Practices on Sawn Board Quality and Recovery, New Zealand Journal of Forestry Science, 39, (1) pp. 39-55. ISSN 0048-0134 (2009) [Refereed Article] 
Nelson, R and Shield, E, Australian woodchip exports: Future commercial benefits of plantation hardwood chip production, Australian Commodities, 10, (1) pp. 74-80. ISSN 1321-7844 (2003) [Refereed Article] 
Conference Publication
Balasso, M and Hunt, M and Nolan, G and Kotlarewski, N and Jacobs, A and O'Reilly-Wapstra, J, Evaluation of non-destructive techniques and visual assessments of grade fibre-grown Eucalyptus logs for structural products, Proceedings of the 21st International Non-destructive Testing and Evaluation of Wood Symposium, 24-28 September 2019, Freiburg, Germany (2019) [Conference Extract]
Balasso, M, Our daily wood, Program for the Forest Education Foundation's Conference, 31 October- 01 November 2019, Launceston, Tasmania (2019) [Keynote Presentation]
Balasso, M and Hunt, M and Nolan, G and Kotlarewski, N and Jacobs, A, Alignment of resources for higher quality production: change and challenges in alternative uses of fibre-grown E. nitens plantations, Proceedings of the 12th Graduate Research Conference of University of Tasmania, 06-07 September 2018, Hobart (2018) [Conference Extract]
Balasso, M and Hunt, M and Nolan, G and Kotlarewski, N and Jacobs, A, From the forest to products: how segregation systems will allow the characterisation of fibre-grown plantations for higher value production, Proceedings of the 61st International Convention of Society of Wood Science and Technology and Japan Wood Research Society, 05-09 November 2018, Nagoya, Japan (2018) [Conference Extract]
Derikvand, M and Bignell, M and Balasso, M and Kotlarewski, N and Jiao, H and Lee, M and Nolan, G, Multi-disciplinary optimisation of nail-laminated timber-concrete composite panels constructed of fibre-managed plantation eucalypt, Proceedings of the 61st International Convention of Society of Wood Science and Technology and Japan Wood Research Society, 5-9 November 2018, Nagoya, Japan, pp. 1-6. (2018) [Non Refereed Conference Paper]
Kotlarewski, N, TIA Future Forum Big Ideas: from plantation hardwood chip to sustainable buildings, TIA Future Forum, 27 June, Hobart, Tasmania (2018) [Plenary Presentation]
Hunt, MA, Overview of the achievements of the National Centre for Future Forest Industries, National Centre for Future Forest Industries Delivery Workshop 2014, 25-27 November 2014, Hobart, Australia (2014) [Conference Extract] 
Hunt, MA, Prospects for collaborative research supporting the Australian forestry and forest products sector, National Centre for Future Forest Industries Delivery Workshop 2014, 25-27 November 2014, Hobart, Australia (2014) [Conference Extract] 
Hunt, MA, Reflections on a career in science and leadership, ConQEST 2014, 30 June - 1 July 2014, Brisbane, Australia (2014) [Conference Extract] 
Blackburn, D and Nolan, G, The potential for rotary peeling veneer in regional Tasmania, National Centre for Future Forest Industries Delivery Workshop final report, 25-27 November 2014, Hobart, Tasmania, pp. 1-35. (2014) [Keynote Presentation]
Hunt, MA, CRC Forestry Programme 1: achievements and future challenges, Annual Science Meeting of the CRC Forestry, 18-20 May 2010, Fremantle, Australia (2010) [Conference Extract] 
Contract Report, Consultant's Report
Blackburn, D and Vega, M, Segregation of Eucalyptus nitens logs from fibre-managed plantations for veneer based engineered wood products: final report, Centre for Sustainable Architecture with Wood (CSAW) School of Architecture and Design, UTAS, Hobart, Tasmania, 10 November (2017) [Contract Report]
Blackburn, D and Vega, M and Van Overbergh, J and Reich, L, Veneer product from fibre-managed plantation hardwood: Final report, University of Tasmania School of Architecture and Design, Hobart, 07 November (2016) [Contract Report]
Blackburn, D and Lee, M, Testing of Imported Plantation Eucalypt Timber Phase 2: Report for Porta Mouldings, Project 1: The physical properties of imported eucalypt hardwoods, Porta Mouldings Pty Ltd., Hobart, Tasmania, 20 January (2015) [Contract Report]
Farrell, RR and Atyeo, W and Siemon, G and Daian, G and Ozarska, B, Impact of sapwood and the properties and market utilisation of plantation and young hardwoods: Executive Summary and Literature Review, Forest & Wood Products Australia, PNB039-0708 (2010) [Contract Report]
Farrell, RR and Mihalcheon, CJ, Impact of sapwood and the properties and market utilisation of plantation and young hardwoods: Visual properties assessment, Forest & Wood Products Australia, PNB039-0708 (2010) [Contract Report]
Farrell, RR and Gadient, S, Timber Flooring Manual: Underfloor heating, Forest & Wood Products Australia (2009) [Contract Report] 
Farrell, RR and Innes, TC and Nolan, G, Sorting Plantation Eucalyptus nitens logs with acoustic wave velocity, Forest & Wood Products Australia, PN07.3018 (2008) [Contract Report] 
Other Public Output
Lee, M and Blackburn, D, Developments in hardwood drying, Centre for Sustainable Architecture with Wood School of Architecture and Design, Hobart, Tasmania (2018) [Report Other]
Blackburn, D and Nolan, G, ACIAR CocoVeneer Objective 1.2: Coconut veneer value-chain proposal, University of Tasmania School of Architecture and Design, Hobart (2016) [Government or Industry Research]
Blackburn, D and Lee, M, Researchers in Business Project: Timber Drying at Porta Mouldings Bridgewater Site, Project: Optimisation of drying process and improvements in the dried quality of Tasmanian oak, Porta Mouldings Pty Ltd., Hobart, Tasmania, Interim report - 15 March (2015) [Government or Industry Research]
Blackburn, D and Lee, M, Testing of Imported Plantation Eucalypt Timber: Report for Porta Mouldings, Project 2: The staining and finishing of imported eucalypt hardwoods, Porta Mouldings Pty Ltd., Hobart, Tasmania, 07 May (2015) [Government or Industry Research]
Hunt, MA and Shanks, JD, Manufacturing buildings from low grade wood and residue, Australian Forest Grower, Deakin, ACT, Australia, 37, 2, pp. 33-35. (2014) [Magazine Article]
Blackburn, D and Nolan, G, The potential for regional rotary veneer peeling in Tasmania, National Centre for Future Forest Industries, Hobart, Tasmania, 02 December (2014) [Report Other]

This list was generated on Sun Dec 15 17:59:07 2019.