eCite Digital Repository

A feasibility study of using two-component polyurethane adhesive in constructing wooden structures


Derikvand, M and Ebrahimi, G and Tajvidi, M, A feasibility study of using two-component polyurethane adhesive in constructing wooden structures, Journal of Forestry Research, 25, (2) pp. 477-482. ISSN 1007-662X (2014) [Refereed Article]

Copyright Statement

Northeast Forestry University and Springer-Verlag Berlin Heidelberg 2013

DOI: doi:10.1007/s11676-013-0425-y


This investigation was conducted to determine the feasibility of using a two-component polyurethane (PUR) adhesive, with special waterproof properties, in constructing wooden structures. We designed and conducted tests to compare the shear strength and adhesion performance of PUR with polyvinyl acetate (PVAc) adhesive on block-shear specimens constructed of oriental beech (Fagus orientalis L.), fir (Abies alba Mill.), poplar (Populus deltoides Bartr.), white oak (Quercus alba L.), sycamore (Platanus orientalis L.) and white walnut (Juglans cinerea L.). The values of the percentage of wood failure were also determined in specimens constructed with each adhesive. The highest shear strength values of both adhesives were obtained in specimens constructed of beech, while the lowest shear strength values were obtained in fir and poplar specimens. Average shear strength of the PUR adhesive was 16.5% higher than that of the PVAc adhesive. Specimens constructed of fir, poplar and sycamore were characterised by the highest percentages of wood failure, whereas the lowest average percentages of wood failure were obtained in beech and oak specimens. With the exception of oak specimens, there was no statistically significant difference between percentage of wood failure among the PUR and PVAc adhesives. Generally, the PUR adhesive showed an acceptable adhesion performance on wood materials used in our study.

Item Details

Item Type:Refereed Article
Keywords:wooden structures, polyurethane adhesive, polyvinyl acetate adhesive, shear strength, wood failure, wood species
Research Division:Engineering
Research Group:Materials engineering
Research Field:Timber, pulp and paper
Objective Division:Manufacturing
Objective Group:Wood, wood products and paper
Objective Field:Wood sawing and veneer
UTAS Author:Derikvand, M (Mr Mohammad Derikvand)
ID Code:122601
Year Published:2014
Web of Science® Times Cited:3
Deposited By:Architecture and Design
Deposited On:2017-11-20
Last Modified:2017-12-13

Repository Staff Only: item control page